LC2000/LC2000-IQ/LC4000/LC4000-IQ
Channel Operation Menus
Issue 1 Rev 6
Page 82
© 2015 SAM
8.7.3 Shuffle
The Shuffle menu contains the output information from the audio processors, as defined on
the Routing screen.
8.7.3.1
Output Pairs 1–8 L/R
•
Process Pairs Source:
For each of the output pairs, 1–8, you can select the audio
source to be routed to the output.
Note: Certain rules determine which combinations are valid. An invalid combination
will force the output to silence. The following table shows the rules that govern output
pair combinations:
P = PCM, N = non-PCM, S = silence, T = test tone, F= forced mute (silence).
•
Invert Phase:
Enables you to invert the phase of the left and right audio channels.
This control is useful for dealing with input audio discrepancies.
•
Control:
Control options.
•
Use Routing:
Routes the audio output from the audio processor.
•
Tone:
Makes the audio input source a test tone.
•
Silence:
Mutes the audio input source.
For more information about audio routing, see the
Audio Processing Application Note
under
the “Support” tab at:
www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/
Non-PCM
PCM
Tone
Silence
Loss
Non-PCM
N or F
F
F
F
F
PCM
F
P
P
P
F
Tone
F
P
T
P
F
Silence
F
P
P
S
F
Loss
F
F
F
F
F
