LC2000/LC2000-IQ/LC4000/LC4000-IQ
System Setup Menus
Issue 1 Rev 6
Page 47
© 2015 SAM
7.9 Memories
The Memories
menu enables you to save up to eight system-level memory setups and recall
them when required.
You can change the default memory names to more relevant ones if required.
Memories set at a system level store all system settings
except for
the following:
•
Network > DHCP
•
Network > IP Configuration
•
Network > IP Gateway
•
Network > IP Netmask
•
RollCall > Unit Name
Settings stored in the system memories include:
•
CVBS encoder or decoder settings (if fitted) - LC2000/LC4000 only
•
Dolby option settings (if fitted)
•
Genlock selection and adjustment
•
AES and analog audio routing
•
CVBS calibration - LC2000/LC4000 only
System memories do not store any processing channel data.
7.9.1 Memory Select
Memory Select lists the eight available memories.
7.9.2 Save Memory
Use the Save Memory button to save a new memory.
7.9.3 Recall Memory
The Recall Memory list recalls the settings saved in a memory location.
