LC2000/LC2000-IQ/LC4000/LC4000-IQ
RollCall Control Panel Channel Operation Screens
Issue 1 Rev 6
Page 144
© 2015 SAM
11.7.3 Dolby E Alignment Offset
The Dolby E Alignment Offset slider sets the guard-band position of any output pair
containing Dolby E, to allow for downstream processing. By default, the position of the
guard-band is set automatically and is dependent on the output standard.
11.7.4 Delay
The Delay controls enable you to set delay pair offsets and the audio delay relative to the
video delay.
11.7.4.1
Global Delay Pair Offsets
•
Pair 1–8:
Adjusts the audio delay offset for each of the eight audio channel pairs. The
adjustment range is -40 ms to 200 ms in 1 ms steps. The preset value is 0 ms.
The Total box shows the current total pair delay.
11.7.4.2
Global Delay
•
Audio:
Adjusts the audio delay relative to the video delay. The adjustment range is
-40 ms to 200 ms in 1 ms steps. The preset value is 0 ms.
The Total box shows the current total audio delay.
•
Video:
The Total box shows the current total video delay.
For more information about audio control, see the
Audio Processing Application Note
under
the “Support” tab at:
www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/
Note:
Global delay is applied to all channels. Individual channel delays are added/subtracted
from this delay.
