LC2000/LC2000-IQ/LC4000/LC4000-IQ
Channel Operation Menus
Issue 1 Rev 6
Page 79
© 2015 SAM
8.7 Audio
The Audio menu enables you to control the routing of the unit’s audio options.
8.7.1 Routing
The Routing control enables you to route the incoming audio to an embedded audio output.
8.7.1.1
Input Pairs Status
The Input Pairs Status list shows the status of the audio input pairs. The audio status display
information is as follows:
•
PCM: Audio is PCM
•
Mute: Audio is muted
•
Tone: Audio is a test tone
•
DolbyE: Audio is Dolby
•
Loss: Audio is unavailable or invalid
8.7.1.2
Process Pair 1–8
For each of the output pairs, 1–8, you can select the audio source to be passed to each audio
processor on the Audio Shuffle screen.
For each of the output pairs you can select the audio source from any of the following inputs:
•
Embedded 1–8
•
AES 1–4
•
Analog 1–4
•
Dolby Decoder (if fitted). You can select each of the four audio pairs from the Dolby
decoder individually:
•
Dolby decoder 1 is pair 1 from the Dolby decoder
•
Dolby decoder 2 is pair 2 from the Dolby decoder
•
Dolby decoder 3 is pair 3 from the Dolby decoder
•
Dolby decoder 4 is pair 4 from the Dolby decoder
•
Dolby Decoder Downmix (if fitted): The Lt/Rt downmix (applicable to 5.1 and 4
channel Dolby formats)
