LC2000/LC2000-IQ/LC4000/LC4000-IQ
Conversion Operational Examples
Issue 1 Rev 6
Page 159
© 2015 SAM
A.2 LC4000/LC4000-IQ Frame Rate Conversion
Example
You have received content at 1080 50i and need to convert it to both 1080 59i and 525 59i for
transmission.
Steps
1.
On the rear panel, connect the SDI source (1080 50i) to SDI In 1.
2.
On the front panel, press the CH SELECT button until the Channel 1 LED is
illuminated.
3.
Press the INPUT Shortcut button.
4.
Choose Input Select > SDI 1, then select Done.
5.
Press the CH SELECT button until the Channel 2 LED is illuminated.
6.
Choose Input Select > SDI 1, then select Done.
7.
Press the HOME button.
8.
Verify that both status displays show “1080 50i” as the input. If either or both status
displays show "input loss", review steps 1 to 6 to ensure you have correctly connected
and routed the source.
9.
Press CH SELECT button until the Channel 1 LED is illuminated.
10. Press the OUTPUT Shortcut button.
11. Select Output Standard > 1080 59i, then select Done.
12. Press the CH SELECT button until the Channel 2 LED is illuminated.
13. Select Output Standard > 525 59i, then select Done.
14. Connect your HD monitor or recording device to Output A1 and your SD monitor or
recording device to Output A2.
Note:
In steps 1 to 6 you have routed the input from SDI In 1 to processing channel 1 and
channel 2.
Note:
In steps 9 to 13 you have set up conversion to HD 1080 59i on processing channel 1 and
conversion to SD 525 59i on channel 2.
