LC2000/LC2000-IQ/LC4000/LC4000-IQ
Troubleshooting
Issue 1 Rev 6
Page 173
© 2015 SAM
B.5.1.2
Testing Channel 1 Timecode Performance
You can test the timecode performance of channel 1 by repeating the timecode performance
test (see “Testing Timecode Performance” on page 172), only this time using one of the other
three channels as the generator. In the following example, channel 2 is the timecode
generator.
LC4000
TC Processor – Channel 1
(set to ‘TC’ from I/P)
TC Processor – Channel 2
(set to ‘TC from IP’)
TC Processor – Channel 3
(set to ‘TC from I/P’)
TC Processor – Channel 4
(set to ‘TC from I/P’)
SDI in 1
SDI in 2
SDI in 3
SDI in 4
SDI out A1
SDI out A2
SDI out B1
SDI out B2
Test
Timecode
TC Processor – Channel 2
(set to ‘generate TC’)
