LC2000/LC2000-IQ/LC4000/LC4000-IQ
RollCall Control Panel Channel Operation Screens
Issue 1 Rev 6
Page 123
© 2015 SAM
11.4 Convert
The Convert menu enables control of motion processing and improves the conversion
performance of stationary content.
11.4.1 Motion Processing
•
Still Process:
Uses powerful motion detection techniques to extract the maximum
resolution from interlaced sources while format or standards converting. The benefits
of this processing are prominent on static logos and computer-generated overlays.
•
Enhanced Still:
Adds field motion detection to still processing. This prevents artifacts
on moving repetitive patterns.
•
Enhanced Film Mode:
Applies an aperture with full progressive frequency response
where the input is film transported by an interlaced video rate input, with cadence
enabled.
•
Clean Cut:
Prevents temporal filtering across a cut in scenes, which can result in
several frames either side of the cut being a mix of the two different scenes.
•
Enhanced De-interlace:
Replaces missing lines with a gradient between the
previous and following lines. This control improves the appearance of de-interlaced
images and is useful when dealing with complex shapes.
For more information about motion processing and enhanced film settings, see the
KudosPro
Still Mode Application Note
and
KudosPro Film Mode Application Note
, under the “Support”
tab at:
www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/
