LC2000/LC2000-IQ/LC4000/LC4000-IQ
Channel Operation Menus
Issue 1 Rev 6
Page 81
© 2015 SAM
Points to consider:
•
Each embedded pair (EMB1/2 to EM15/16) has its own individual tone generator.
•
AES can be balanced or un-balanced (LC2000-IQ/LC4000-IQ, balanced AES only).
Only four pairs of AES can be processed.
•
Analog audio processing is limited to four pairs.
•
Analog and AES outputs are derived from Embedded pairs, hence test-tones follow
Embedded audio settings.
8.7.2.3
Dolby E Alignment Offset
The Dolby E Alignment Offset slider sets the guard-band position of any output pair
containing Dolby E, to allow for downstream processing. By default, the position of the
guard-band is set automatically, and is dependent on the output standard.
8.7.2.4
Delay
The Delay controls enable you to set delay pair offsets and the audio delay relative to the
video delay.
•
Global Delay Pair Offsets:
Global delay offsets for pair 1–8.
•
Pair 1–8:
Adjusts the audio delay offset for each of the eight audio channel pairs.
The adjustment range is -40 ms to 200 ms in 1 ms steps.
The preset value is 0 ms.
•
Pair 1–8 Total:
Shows the current total pair delay.
•
Global Delay:
Global delay settings for pair 1–8.
•
Audio:
Adjusts the audio delay relative to the video delay. The adjustment range
is -40 ms to 200 ms in 1 ms steps. The preset value is 0 ms.
•
Audio Total:
Shows the current total audio delay.
•
Video Total:
Shows the current total video delay.
For more information about audio control, see the
Audio Processing Application Note
under
the “Support” tab at:
www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/
Note:
Global delay is applied to all channels. Individual channel delays are added/subtracted
from this delay.
