SMC Networks 8728L2 - annexe 1, Management Manual

Page: 381 / 546

SNMP C
OMMANDS
4-123
show access-group
This command shows the port assignments of ACLs.
Command Mode
Privileged Executive
Example
SNMP Commands
Controls access to this switch from management stations using the Simple
Network Management Protocol (SNMP), as well as the error types sent to
trap managers.
SNMP Version 3 provides security features that cover message integrity,
authentication, and encryption; as well as controlling user access to specific
areas of the MIB tree. To use SNMPv3, first set an SNMP engine ID (or
accept the default), specify read and write access views for the MIB tree,
configure SNMP user groups with the required security model (i.e., SNMP
v1, v2c or v3) and security level (i.e., authentication and privacy), and then
assign SNMP users to these groups, along with their specific
authentication and privacy passwords.
Console#show access-group
Interface ethernet 1/25
IP standard access-list david
IP access-list jerry
Console#
Table 4-37 SNMP Commands
Command Function Mode Page
snmp-server Enables the SNMPv3 server GC 4-124
show snmp Displays the status of SNMP
communications NE,
PE 4-125
snmp-server
community Sets up the community access string to
permit access to SNMP commands GC 4-127
snmp-server contact Sets the system contact string GC 4-127