S
PANNING
T
REE
A
LGORITHM
C
ONFIGURATION
3-153
•
Migration
– If at any time the switch detects STP BPDUs, including
Configuration or Topology Change Notification BPDUs, it will
automatically set the selected interface to forced STP-compatible
mode. However, you can also use the Protocol Migration button to
manually re-check the appropriate BPDU format (RSTP or
STP-compatible) to send on the selected interfaces.
(Default: Disabled)
Web
– Click Spanning Tree, STA, Port Configuration or Trunk
Configuration. Modify the required attributes, then click Apply.
Figure 3-66. Configuring Spanning Tree Algorithm per Port
CLI
– This example sets STA attributes for port 7.
Configuring Multiple Spanning Trees
MSTP generates a unique spanning tree for each instance. This provides
multiple pathways across the network, thereby balancing the traffic load,
preventing wide-scale disruption when a bridge node in a single instance
fails, and allowing for faster convergence of a new topology for the failed
instance.
Console(config)#interface ethernet 1/7
4-144
Console(config-if)#no no spanning-tree spanning-disabled
4-189
Console(config-if)#spanning-tree port-priority 0
4-195
Console(config-if)#spanning-tree cost 50
4-194
Console(config-if)#spanning-tree link-type auto
4-198
Console(config-if)#no spanning-tree edge-port
4-196
Console(config-if)#spanning-tree protocol-migration
4-201
Console(config-if)#
Summary of Contents for 8728L2 - annexe 1
