SMC Networks 8728L2 - annexe 1, Management Manual

Page: 269 / 546

C
OMMAND
G
ROUPS
4-11
Command Groups
The system commands can be broken down into the functional groups
shown below
.
Table 4-4 Command Group Index
Command Group Description Page
Line Sets communication parameters for the serial port
and Telnet, including baud rate and console
time-out 4-13
General Basic commands for entering privileged access
mode, restarting the system, or quitting the CLI 4-25
System Management Controls system logs, system passwords, user
name, browser management options, and a variety
of other system information
4-31
Flash/File Manages code image or switch configuration files 4-83
Authentication Configures logon access using local or remote
authentication; also configures port security and
IEEE 802.1X port access control 4-90
Access Control List Provides filtering for IP frames (based on address,
protocol, TCP/UDP port number or TCP control
code) or non-IP frames (based on MAC address or
Ethernet type) 4-112
SNMP Activates authentication failure traps; configures
community access strings, and trap managers; also
configures IP address filtering 4-123
Interface Configures the connection parameters for all
Ethernet ports, aggregated links, and VLANs 4-143
Broadcast Configures broadcast storm control 4-156
Mirror Port Mirrors data to another port for analysis without
affecting the data passing through or the
performance of the monitored port 4-158
Rate Limiting Controls the maximum rate for traffic transmitted
or received on a port 4-160