VLAN C
ONFIGURATION
3-165
VLAN(s) indicated by the frame tag. However, when this switch receives
an untagged frame from a VLAN-unaware device, it first decides where to
forward the frame, and then inserts a VLAN tag reflecting the ingress
port’s default VID.
Enabling or Disabling GVRP
(Global Setting)
GARP VLAN Registration Protocol (GVRP) defines a way for switches to
exchange VLAN information in order to register VLAN members on
ports across the network. VLANs are dynamically configured based on
join messages issued by host devices and propagated throughout the
network. GVRP must be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
(Default: Disabled)
Web
– Click VLAN, 802.1Q VLAN, GVRP Status. Enable or disable
GVRP, and click Apply.
Figure 3-70. Enabling GVRP Status
CLI
– This example enables GVRP for the switch.
Displaying Basic VLAN Information
The VLAN Basic Information page displays basic information on the
VLAN type supported by the switch.
Field Attributes
•
VLAN Version Number*
– The VLAN version used by this switch
as specified in the IEEE 802.1Q standard.
Console(config)#bridge-ext gvrp
4-225
Console(config)#
Summary of Contents for 8728L2 - annexe 1
