C
OMMAND
L
INE
I
NTERFACE
4-60
logging trap
This command enables the logging of system messages to a remote server,
or limits the syslog messages saved to a remote server based on severity.
Use this command without a specified level to enable remote logging. Use
the
no
form to disable remote logging.
Syntax
logging trap
[
level
]
no logging trap
level
- One of the level arguments listed below. Messages sent
include the selected level up through level 0. (Refer to the table on
page 4-57.)
Default Setting
• Disabled
• Level 7 - 0
Command Mode
Global Configuration
Command Usage
• Using this command with a specified level enables remote logging and
sets the minimum severity level to be saved.
• Using this command without a specified level also enables remote
logging, but restores the minimum severity level to the default.
Example
Console(config)#logging trap 4
Console(config)#
Summary of Contents for 8728L2 - annexe 1
