C
ONFIGURING
THE
S
WITCH
3-78
Web
– Click Security, SSH, Settings. Enable SSH and adjust the
authentication parameters as required, then click Apply. Note that you
must first generate the host key pair on the SSH Host-Key Settings page
before you can enable the SSH server.
Figure 3-35. SSH Server Settings
CLI
– This example enables SSH, sets the authentication parameters, and
displays the current configuration. It shows that the administrator has
made a connection via SHH, and then disables this connection.
Console(config)#ip ssh server
4-47
Console(config)#ip ssh timeout 100
4-48
Console(config)#ip ssh authentication-retries 5
4-49
Console(config)#ip ssh server-key size 512
4-50
Console(config)#end
Console#show ip ssh
4-53
SSH Enabled - version 2.0
Negotiation timeout: 120 secs; Authentication retries: 3
Server key size: 768 bits
Console#show ssh
4-53
Information of secure shell
Session Username Version Encrypt method Negotiation state
------- -------- ------- -------------- -----------------
0 admin 2.0 cipher-3des session-started
Console#disconnect 0
4-23
Console#
Summary of Contents for 8728L2 - annexe 1
