C
ONFIGURING
THE
S
WITCH
3-56
Command Attributes
•
User Name
– The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
•
Group Name
– The name of the SNMP group to which the user is
assigned. (Range: 1-32 characters)
•
Engine ID
– The engine identifier for the SNMP agent on the remote
device where the remote user resides. Note that the remote engine
identifier must be specified before you configure a remote user. (See
“Specifying a Remote Engine ID” on page 3-51.)
•
Remote IP
– The Internet address of the remote device where the user
resides.
•
Security Model
– The user security model; SNMP v1, v2c or v3.
(Default: v1)
•
Security Level
– The security level used for the user:
- noAuthNoPriv – There is no authentication or encryption used in
SNMP communications. (This is the default for SNMPv3.)
- AuthNoPriv – SNMP communications use authentication, but the
data is not encrypted (only available for the SNMPv3 security model).
- AuthPriv – SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
•
Authentication
Protocol
– The method used for user authentication.
(Options: MD5, SHA; Default: MD5)
•
Authentication
Password
– A minimum of eight plain text characters
is required.
•
Privacy
Protocol
– The encryption algorithm use for data privacy; only
56-bit DES is currently available.
•
Privacy
Password
– A minimum of eight plain text characters is
required.
Summary of Contents for 8728L2 - annexe 1
