manualshive.com logo in svg

SMART Rear Projection SMART Board 1800, Installation Manual

Looking to set up your SMART Rear Projection SMART Board 1800? Look no further! Our comprehensive Installation Manual provides step-by-step instructions to ensure a hassle-free setup process. Download it for free at manualshive.com and unlock the full potential of your advanced projection board.

Share
Download
background image

RPSB 1800/1802 Installation Guide

5

2. Lift the top baffle slightly, then 

forcefully

 pull on the lip of the outer baffle (where

you see the words "Pull Here"), so that the large rear mirror starts to rotate
outwards.

NOTE

Be very careful not to touch the mirror itself; any fingerprints left on the mirror may
obscure the projected image.

Mirror Pan

Top Baffle

Outer Baffle
marked “Pull Here”

Outer baffle

Outer baffle

Step 2:

 Lifting the Top Baffle/Pulling on Outer Baffle

Summary of Contents for Rear Projection SMART Board 1800































































Reviews:

No comments

Related manuals for Rear Projection SMART Board 1800

GardePro B180C Instruction Manual preview
B180C
Brand: GardePro Pages: 49
NB N4 Manual preview
N4
Brand: NB Pages: 14
YURAKU YUR.VISION YV24WBH1 - Brochure preview
YUR.VISION YV24WBH1 -
Brand: YURAKU Pages: 2
YURAKU YUR.VISION YV216WB2 Operation Instructions Manual preview
YUR.VISION YV216WB2
Brand: YURAKU Pages: 11
YURAKU YUR.VISION YV19WB1 - Brochure preview
YUR.VISION YV19WB1 -
Brand: YURAKU Pages: 2
VARIZOOM VZ-TFT-7 Quick Start Manual preview
VZ-TFT-7
Brand: VARIZOOM Pages: 2
Zenith P42W24B Installation And Operating Manual preview
P42W24B
Brand: Zenith Pages: 32
CueScript CSTD Manual preview
CSTD
Brand: CueScript Pages: 5
Luvion SUPREME CONNECT 2 Instruction Manual preview
SUPREME CONNECT 2
Brand: Luvion Pages: 102
Barco MDSC-8358 MNA Series User Manual preview
MDSC-8358 MNA Series
Brand: Barco Pages: 54
Spectrum Controls InView 2706-PENETx2-SC Quick Start Manual preview
InView 2706-PENETx2-SC
Brand: Spectrum Controls Pages: 8
Hyundai ImageQuest V570 User Manual preview
ImageQuest V570
Brand: Hyundai Pages: 18
Farenheit EX-1502CM User Manual preview
EX-1502CM
Brand: Farenheit Pages: 8
Flight Display Systems FD151CV-LP Installation And Operation Manual preview
FD151CV-LP
Brand: Flight Display Systems Pages: 18
Pro Lite Marquee-Lite PLUS 3225 Installation Manual preview
Marquee-Lite PLUS 3225
Brand: Pro Lite Pages: 10
Dantherm MASTER SM 4.0 User And Maintenance Book preview
MASTER SM 4.0
Brand: Dantherm Pages: 84
ACRONIS DRIVE MONITOR User Manual preview
DRIVE MONITOR
Brand: ACRONIS Pages: 25
J-Tech Digital JTECH-MV161 User Manual preview
JTECH-MV161
Brand: J-Tech Digital Pages: 10

Brands by name

Popular brands

Load more brands