RPSB 1800/1802 Installation Guide
42
A large gray rectangular image will almost entirely fill the SMART Board screen. This
screen will contain the number of crosses associated with the orientation level chosen.
5. Follow the on-screen instructions, pressing your finger squarely on the yellow center of
each red cross, in the order specified by the large white arrow. To begin the orientation,
press on the cross highlighted in red at the upper-left corner of the screen. You will hear a
beep and the next cross in the series will be highlighted in red.
NOTE
: If you press on the crosses out of sequence or inaccurately, a
Bad Orientation
Point
dialog box will appear. To correct the bad orientation, select the OK button at the
bottom of the screen
using the mouse attached to your computer
. This is necessary
because the system has lost Board-awareness while orienting.
When you have pressed on the final cross, the Orientation screen will disappear.
6. Test if the orientation was successful by moving your finger across the SMART Board.
The cursor should track your finger very closely and appear directly beneath the center
of your fingertip.
