RPSB 1800/1802 Installation Guide
3
3. If the front cabinet doors have shifted and appear to be misaligned, use a Phillips No.
2 screwdriver to adjust the screws on the door hinges until the doors open and close
smoothly, without rubbing against either each other or the floor of the cabinet.
Repositioning the Rear Mirror
To protect the rear mirror and decrease the bulk of the RPSB 1800/1802 during shipment, the
mirror is rotated and secured inside the cabinet. The rear mirror must be repositioned so that it
extends beyond and is angled upward from the rear of the cabinet. This accommodates the
long projector throw distance required by the large size of the RPSB 1800/1802 SMART Board
screen.
raises or lowers the door at
the hinged side
moves the door closer or
further from the cabinet
moves the doors closer or further
apart; also raises or lowers bottom
corners of doors where they meet
Close-up of Front Door Hinge and Screws
E
G
F
1
C
5
4
B
3
2
1
A
G
D
1 0
9
8
7
6
3
2
F
E
RPSB 1800/1802 in Transport and Operating Position
