
RF Interference and Solutions
Solutions to RF Interference
78
SKF Wireless Machine Condition Sensor
Service Manual
where the WirelessHART network is located, you can make sure that those channels are
not used by multiple networks simultaneously. The example below shows the usage
over channels 1 to 4.
Figure 44
.
802.11.g and Background Noise.
Use the Channel Blacklist feature on the gateway’s
Wireless Communication
>
Setup
web page to disable selected channels. Blacklisting can improve communication
stability and reduce power wasted due to retry attempts on fully blocked channels.
Select the
After Restart
check box for the channel(s) to blacklist. Then, click
Send to
Device
to send the new channel list to the gateway.
Figure 45
.
Channel Blacklist
Feature.