SKF Wireless Machine Condition Sensor
95
Service Manual
Appendix
A
CMWA 8800 System Setup Checklist
The checklist example below provides a general guideline to follow when setting up the
CMWA 8800 sensors in a WirelessHART network or when troubleshooting issues in a
network. For brevity, in this checklist the SKF Wireless Machine Condition Sensor
System Setup Guide title is shortened to the “Setup Guide.” The Wireless Sensor Device
Manager User Manual title is shortened to the “WSDM User Manual.”
IMPORTANT: The checklist assumes your WirelessHART network already
exists and is operational.
Step
Done
Task and Reference
1.
Set up the WirelessHART commissioning gateway.
Setup Guide (P/N 32257600),
Chapter 1, System Setup
2.
Power on the sensors
and j
oin the sensors to the commissioning gateway.
Setup
Guide, Chapter 1, System Setup
3.
Install Device Manager.
WSDM User Manual, Chapter 2, Device Manager Software
Installation (P/N 32286200)
4.
Build the wireless system’s hierarchy in the Device Manager.
WSDM User Manual,
Chapter 3, Sensor Setup and Commissioning (
For a new Device Manager installation,
acquire the License Key.)
5.
Configure the sensors to join the pro
duction network.
WSDM User Manual, Chapter
3, Sensor Setup and Commissioning
6.
Mount the sensors in the plant and power on the sensors.
Setup Guide, Chapter 2,
How to Mount the SKF Wireless Machine Condition Sensor
7.
Configure the sensors’ data collection schedule (bursting of measurement results to
the gateway and polling schedules for retrieving results to the Device Manager
database).
WSDM User Manual, Chapter 3, Sensor Setup and Commissioning
8.
Verify communication quality.
WSDM User Manual, Chapter 3, Sensor Setup and
Commissioning
9.
If needed, configure the P+F Adapter as a routing node.
Setup Guide, Chapter 5,
Configuration of the P+F WHA-ADP WirelessHART
Adapter
10.
for all sensors in the network. Then, be sure to
disable routing for all sensors not to be used as routers. (Do this in the P+F
gateway’s
Operating Modes
web page.)
This Guide, Chapter 4, Wireless Sensor
Device Manager
11.
Start the Device Manager batch service.
WSDM User Manual, Chapter 3, Sensor
Setup and Commissioning
12.
Set up the data export process to SKF @ptitude
Analyst and verify it works.
WSDM
User Manual, Chapter 5, Exporting Data to SKF @ptitude Analyst