SKF Baker AWA-IV 12 HO, User Manual

Page: 72 / 214

Data tab—PI view
Clicking on the PI (Polarization Index) tab displays the PI view, which contains the PI/DA
graph and data table.
Figure 53. Data tab, PI view.
The PI graph charts the current vs. time and the MegOhm reading vs. time. Under the PI
graph are selected data points used in the graph. On the right side of the graph you will see
data for PASS/FAIL, test voltage, DA/PI ratios, and four check boxes.
Use the Megohm Plot and Current Plot check boxes to select whether the data will be plotted
in minutes or seconds. Unchecking both boxes in a section removes the element from the
display.
In the small graphic display area, you can hold down the left mouse button and drag a box
around an area of the screen to zoom in on the area. You can also use your finger to draw
the box around the area you want to zoom in on.
52 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
Baker AWA-IV software overview