Modifying the display of lists in the Motor ID and Route tabs
The information presented in the motor lists within the
Motor ID
and
Route
tabs can be
customized by a qualified system administrator modifying the
AWA.INI
file.
In the following example, the
Route
tab list shows that the modification includes listing the
Plant name, Building (BLDG/Unit), and the Motor ID. Using the scroll bar at the bottom of the
list shows all the information presented and formatted as defined by the
AWA.INI
file
modification.
The same or different elements can be displayed in defined formats within the
Motor ID
tab
as well, depending on how the parameter settings are defined.
Figure 40.
Right pane of
Main
window features
Data
,
Tests
, and
Trending
tabs.
NOTICE
Only a qualified system administrator should make changes to the AWA.INI
file. Errors in formatting or syntax, accidental deletions or omissions, or
other mistakes can cause improper software behavior.
Best practices are recommended, including backing up original AWA.
INI files to provide a reset point if needed. For more information on this
process, refer to the
AWA Database Tool Administrator Guide.
PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
41
Baker AWA-IV software overview
Summary of Contents for Baker AWA-IV 12 HO
