SKF Baker AWA-IV 12 HO, User Manual, Page: 50 / 214

Using version 4 software for the first time
The first time the Baker AWA-IV software is used, the Enter Test Equipment Information
window will appear. Select the analyzer type, serial number (found on a sticker on back of
unit), and customer’s analyzer ID (can be an asset ID). If the software is being installed on a
desktop computer, all other fields will be gray.
This information will be used to track each data record and to identify which Baker AWA-IV
analyzer acquired the given record. The analyzer information is usually entered at the
manufacturer before the Baker AWA-IV is shipped; however, it may be changed via
calibration, which can be invoked by checking the
Enable Calibration
box in the
Tests
tab.
Figure 27. Enter Test Equipment Information window.
NOTE
Test results from a converted database (databases from a pre-4.0 version) will not
have this information. Converted records will contain the type of Baker AWA-IV
converted. Subsequent test results will be stamped with machine information,
which can be examined in the Application view at the bottom of the pane.
30 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
Baker AWA-IV software overview