SKF Baker AWA-IV 12 HO, User Manual, Page: 123 / 214

Creating a new motor voltage class
If an appropriate motor class is not available for your specific motor, you can create a new one
following this procedure.
1) Open the
Tests
tab.
2) Check the
Edit Test ID
box and enter password as needed.
3) Click the
Add
button.
4) Click the
Add Blank Test ID
radio button to enable the fields below.
5) In the
Target Motor Voltage Class
field, enter the value for the new motor class
needed. In the following example, we created a 230 Volt class.
6) You do not need to enter anything in the
Enter new Test ID
field, but you can do so if
you plan to create a new Test ID as well.
Figure 110. Creating a new motor voltage class via the Create New Test ID dialog.
7) Click on the Add Voltage Class button then click Yes in the confirmation dialog that
appears next.
8) The new motor voltage class will be added to the list for future use.
PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual 103
Test procedures