SKF Baker AWA-IV 12 HO, User Manual

Page: 189 / 214

Step Voltage test results table—(TestResultsPrgHiPot)
The TestResultsPrgHiPot table contains a record for a test result, only if a Step Voltage Test
test has been performed. Then a record containing the motor_key and same test_resultno
for each step of the test is added to the table.
Table 31.
Step voltage table field descriptions.
Field name Type Description
test_resultno Long integer Foreign key used to link test result records.
motor_key Long integer Motor Identification key.
step_order Long integer Enumerator used to sort results in step
order.
step_voltage Long integer Voltage for the given test interval.
step_time Short integer Length of step in seconds.
step_ramp_rate Short integer Not used at this time.
step_min_Meg-Ohm Long integer Minimum Meg-Ohms aloud for the step.
Meg-Ohm_at_endstep Long integer Meg-Ohm value at the end of the step.
current_at_endstep Double Current in micro amps at the end of the
step.
voltage_1sec Memo Comma delimited field containing the
voltage for each second of the interval,
including ramping voltage.
current_1sec Memo Comma delimited field containing the
current for each second of the interval,
including current during ramping of voltage.
time_1sec Memo Comma delimited field containing the times
progression for each second of the interval,
including time during ramping of voltage.
PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual 169
Database definition