SKF Baker AWA-IV 12 HO, User Manual

Page: 192 / 214

Table 35. Test results parameters table; resistance test parameters field descriptions.
Field name Type Description
resist_no_leads Short integer # of leads (2 or 3) Used also in surge.
resist_deltaR_enabled Yes/No 1=delta R used in pass/fail; 0=Not used.
resist_ deltaR_maxpercent Short integer Max difference in percent.
resist_external_enabled Yes/No Always false 0=No external testing.
resist_isAuto Yes/No 1=Automatic; 0=Manual
resist_4lead_test_enabled Yes/No 1=4 lead test enabled; 0=4 lead test
disabled (Only disabled at this time)
resist_correct_to_temp_enabled Yes/No Correct resistance 1=Yes; 0=No.
resist_temp_correct_to Short integer Defines the value that the temperature will
be corrected to.
resist_temp_correct_factor Double Default 234.5 for copper.
resist_target_coilRes_enabled Yes/No 1=Coil resistance checking enabled;0=not
enabled.
resist_target_coilRes Double Coil resistance to compare tested value
with.
resist_target_coilRes_tolerance Long integer Tolerance set for target coil resistance.
Table 36.
Test results parameters table; Meg-Ohm test parameters field descriptions.
Field name Type Description
Meg-Ohm_test_voltage Short integer Target voltage of test.
Meg-Ohm_min_Meg-Ohm Short integer Minimum Meg-Ohm value.
Meg-Ohm_test_time Short integer Length of test.
Meg-Ohm_ramp_rate Short integer Ramp rate.
Meg-Ohm_trip_level Short integer HiPot trip value.
Meg-Ohm_discharge_multiplier Short integer Number of minutes to discharge.
Meg-Ohm_PowerPack_enabled Yes/No 1=PP enabled; 0=No PP.
172 PUB CM/I4 71-015 EN V13.2 Static Motor Analyzer—Baker AWA-IV User Manual
Database definition