Skandika Fitness MONTREUX Series, Assembly Instructions And User Manual

Page: 38 / 92

38
Set-up instructions:
Before starting to assemble please check according to the part-list in this manual, if all parts are com-
plete. Perhaps some parts are already pre-assembled for your convenience. For your safety in some
cases lock nuts were used. Maybe it is a little difficult to screw them tightly onto the respective screws,
but they will not get loose easily (to ensure a safe connection).
If you should loose and fix those lock nuts several times, they will lose this lock mechanism.
In this case you should use new lock nuts of same size. For the assembly of this item we recommend
using the provided tools.
Attach stabilizers to base
First attach the front stabilizer (2) &
rear stabilizer (3) to the main frame
(1) with four carriage bolts M8x60 (6),
four curve washers (11), four spring
washers (12) and four domed nuts
M8 (13).
The rear stabilizer (3) is equipped with
adjustable caps (8) for compensation
of uneven floor if necessary. Adjust
these end caps until the exercise bike
is standing firmly on the floor.
Properly fix the stabilizers in order to
avoid loosing them during exercise.
SET-UP