Skandika Fitness MONTREUX Series, Assembly Instructions And User Manual

Page: 39 / 92

39
Seat assembly
Shove the seat (45) onto the seat support stem (10) and fix the seat support stem (10) onto the seat
post (4) with flat washer (54) and knob (57).
The seat (45) can be adjusted according to your personal need by loosing the knob (57) – see the
below small drawing “backward” / “forward”. Then, loose the adjustable knob (41) on the main frame
and slide the seat post (4) onto the rear stem of the main frame and secure with the knob (41) in a
proper height. The seat should be adjusted up and down, backward and frontward to fit users.
How to use the knob (41):
The seat support tube can be fixed at various heights by loosing and pulling out the knob (41), adjus
-
ting the support tube to the desired height and then fix the knob (41) again properly. The seating height
is correct when the knee is slightly bent with the pedal vertically downwards and the foot parallel to the
floor.
SET-UP
GB