IK360 -CAN
x
Date: 23.01.2017 Page 4 of 41 Art.no. 86089 Mod. Status 10/17
1
General Safety Advice
Read these instructions carefully and have a look at the equipment to become familiar with the
device before trying to install, operate or maintain it.
The following special messages may appear throughout this documentation & on the equipment
to warn of potential hazards or to call attention towards information that clarifies / simplifies a
procedure.
The addition of this symbol to a Danger or Warning safety label indicates that an
electrical hazard exists, which will result in personal injury, if the instructions are not
followed.
This is the safety alert symbol. It is used for alerting, in case of potential personal
injury or hazards. Obey all safety messages that follow this symbol to avoid possible
injury or death.
Please Note
Electrical equipment should be serviced only by qualified personnel. No responsibility is
assumed by SIKO for any consequences arising out of the use of this material. This document
is not intended as an instruction manual for untrained persons.
About this manual
This user manual explains how to install and configure the IK360 inclinometer with a CANopen
interface by illustrations.