Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 219
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Access
Default
Bridge Base Port
The number of the port for
which this entry contains
bridge management
information.
In the CLI port name is used
instead of number
ieee8021BridgeBasePort
(1.3.111.2.802.1.1.2.1.1.4.1.2)
host, eth0, eth1, eth2,
s1, c2, c3, c4
N/A
N/A
Bridge Port
Interface Index
(interface)
The interface that
corresponds to this port.
ieee8021BridgeBasePortIfInd
ex
(1.3.111.2.802.1.1.2.1.1.4.1.3)
host, eth0, eth1, eth2
In the current version,
when a port is bound
to an internal interface
(s1, c1, c2, c3, c4) then
the value for this
attribute is 0.
RO
N/A
Bridge Port PVID
(pvid)
The port-level VLAN ID that is
assigned to untagged frames
or Priority-Tagged frames
received on the port.
Each PVID must correspond to
a valid VLAN on the
corresponding component. In
practice, this means that the
VLAN must already be
configured in the VLAN Table
for the component before its
VID can be assigned as the
PVID for a port.
ieee8021QBridgePvid
(1.3.111.2.802.1.1.4.1.4.5.1.1)
1..4094
RW
1
Bridge Port Default
Priority (Prio)
An integer indicating the
default ingress User Priority
for this port. This attribute is
relevant for protocols that do
not support native User
Priority, such as Ethernet.
ieee8021BridgePortDefaultUs
erPriority
(1.3.111.2.802.1.1.2.1.3.1.1.1)
0..7
RW
0
