Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 213
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Default
Auto Negotiation
Admin Status
(auto-neg)
An integer representing the
administrative state of auto-
negotiation signaling for the
interface.
Setting this attribute to
enabled causes the auto-
negotiation signaling ability
of the interface to be
operational.
Setting this attribute to
disabled causes the auto-
negotiation signaling ability
of the interface to be non-
operational, and no auto-
negotiation signaling will be
performed. In such a case,
the MAU type is forced to
the value that has been
assigned in the
eth-type
attribute.
ifMauAutoNegAdminSt
atus
(1.3.6.1.2.1.26.5.1.1.1)
Part of
ifMauAutoNegTable
(1.3.6.1.2.1.26.5.1)
1 = Enabled
2 = Disabled
Enabled
Loopback Mode
(loopback-mode)
Loopback mode operation.
N/A
{disabled | external | internal}
Disabled
Loopback
Timeout
(loopback-
timeout)
Loopback timeout,
expressed in seconds.
N/A
Integer
Disabled
Alarm
Propagation Mode
(alarm-
propagation)
Alarm propagation mode is
used to define system
behavior in case of a link
failure
N/A
The possible alarm propagation
values are:
Disabled=No propagation is
performed.
Backward=The Ethernet link is set
to down if the radio link is down or
if a “Peer Eth Down” notification
has been received at the radio
interface.
Forward=A “Peer Eth Down”
notification is sent to the other end
of the radio link if the Ethernet
link is down.
Both Directions=Both Backward
and Forward alarm propagation is
performed.
Disabled
