Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 211
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Syntax
Access
LTR Next Egress
Identifier (next-egr-
id)
An octet field holding the Next
Egress Identifier returned in
the LTR Egress Identifier TLV
of the LTR. The Next Egress
Identifier Identifies the
Linktrace Responder that
transmitted this LTR, and can
forward the LTM to the next
hop. This is the same value as
the Egress Identifier TLV of
the forwarded LTM, if any. If
the FwdYes bit of the Flags
field is false, the contents of
this field are undefined, i.e.,
any value can be transmitted,
and the field is ignored by the
receiver.
1.3.111.2.802.1.1.8.1.7.2.1
.7
(dot1agCfmLtrNextEgress
Identifier)
8 pairs hexadecimal digits,
each pair separated by
dashes: NN-NN-NN-NN-NN-
NN-NN-NN, for example: 00-
00-00-AF-DD-1E-2D-A3
RO
11.12 Network Object Attributes
11.12.1 Ethernet Interface Attributes
This section lists configurable Ethernet Interface attributes (Table
11-18) and read-only
Ethernet Interface attributes (Table
11-19) separately.
Table
11-18 Configurable Ethernet Interface Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Default
Administrative
Status (admin)
The desired operational
state of the interface,
expressed as an integer.
There are no restrictions for
adding an interface in the
Down state to VLAN egress
and untagged lists, or to
FDP.
ifAdminStatus
(1.3.6.1.2.1.2.2.1.7)
1 = Up (operational)
2 = Down (not operational)
When the
set
command is used
together with the
admin
attribute,
the device will report the
administrative status of the device
immediately after command
execution.
For example:
Interface eth7
admin set down
1 (Up)
State Trap (trap)
An integer that indicates
whether linkUp/linkDown
traps should be generated
for this interface.
ifLinkDownTrapEnabl
e
(1.3.6.1.2.1.31.1.1.1.14
)
1 = Enabled
2 = Disabled
1 = Enabled
