Installation and User Manual
EtherHaul
1200™
Page 218
EH-INST-02, Issue 4.0
11.12.3 Bridge Object Attributes
Table
11-22 Bridge Object Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Access
Default
Component ID
Used to distinguish between
the multiple virtual bridge
instances within a PBB.
The component id = s1 cannot
be supplied as argument when
using the
clear
command.
ieee8021BridgeBas
eComponentId
(1.3.111.2.802.1.1.
2.1.1.1.1.1)
None
1
Bridge Address
(addr)
The MAC address to be used by
this bridge when it must be
referred to in a unique fashion.
It is the address of the Host
interface (interface 1).
The MAC base address is the
same as the address of the Host
interface 1.
ieee8021BridgeBas
eBridgeAddress
(1.3.111.2.802.1.1.
2.1.1.1.1.2)
Octet
string
RO
NN-NN-NN-NN-NN-NN
where :
NN is a hexadecimal
number (for example
00-AF-DD-1E-2D-A3).
Component
Number of Ports
(num-ports)
The number of ports controlled
by this bridging entity.
ieee8021BridgeBas
eNumPorts
(1.3.111.2.802.1.1.
2.1.1.1.1.3)
Integer
(32 bit)
RO
Always 2 for C-
components
Always 4 for S-
components
11.12.4 Bridging Port Object Attributes
Table
11-23 Bridging Port Object Attributes
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
Value
Access
Default
Component ID
The component identifier is
used to distinguish between
the multiple virtual bridge
instances within a PB.
Component identifiers must
be defined in the Bridge
Component table (
Table
11-22
).
ieee8021BridgeBasePortComp
onentId
(1.3.111.2.802.1.1.2.1.1.4.1.1)
<comp-id-list>
N/A
N/A
1
This attribute is used as the index key to ieee8021BridgeBaseTable (1.3.111.2.802.1.1.2.1.1) .
