Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 141
Figure
9-9 License Screen
9.8
Performing Address Translation
The ARP table is used to map between IP addresses and physical addresses. Use the
following command to create and modify entries in the ARP table
set
arp
[ip-address <mac-address>]
If the ARP entry does not already exist, the
set arp
command creates it and assigns
the attributes specified. Upon creation, in the event that the interface address or the
default router address is not specified, the entry is created with the default value that
has been defined for the VLAN.
If the ARP entry already exists, then the
set arp
command replaces the attributes that
are currently defined for the entry with the value specified in the command.
Use the following command to display ARP entries:
show arp [<ip-address>]
Figure
9-10 ARP Screen
Use the following command to delete ARP entries and clear their associated statistics:
clear arp [<ip-address>]
Table
11-35
on page 232 lists and describes the ARP table attributes.
