Installation and User Manual
EtherHaul
1200™
EH-INST-02, Issue 4.0
Page 183
Attribute (CLI
Attribute Name)
Description
SNMP Object ID
SNMP Syntax
CLI Syntax
Physical Name
(name)
The textual name of the
physical entity. The value of
this object should be the name
of the component as assigned
by the local device and should
be suitable for use in
commands entered at the
device's `console'. This might
be a text name (e.g., `console')
or a simple component
number (e.g., port or module
number, such as `1'),
depending on the physical
component naming syntax of
the device.
If there is no local name, or if
this object is otherwise not
applicable, then this object
contains a zero-length string.
entPhysicalName
(1.3.6.1.2.1.47.1.1.1.1.7)
character string
character string
Physical
Hardware
Revision (hw-rev)
The vendor-specific hardware
revision string for the physical
entity. The preferred value is
the hardware revision
identifier actually printed on
the component itself (if
present).
Note that if revision
information is stored
internally in a non-printable
(e.g., binary) format, then the
agent must convert such
information to a printable
format, in an implementation-
specific manner.
If no specific hardware
revision string is associated
with the physical component,
or if this information is
unknown to the agent, then
this object will contain a zero-
length string.
entPhysicalHardwareRev
(1.3.6.1.2.1.47.1.1.1.1.8)
character string
character string
