Installation and User Manual
EtherHaul
1200™
Page 92
EH-INST-02, Issue 4.0
7.2.6
Working with Peer MEPs
MEPs connected by the EtherHaul Provider Bridge feature are known as Peer MEPs.
Peer MEPs can be used to measure CCM delay and changes in that delay.
Use the following command to create a Peer MEP entry. This command causes
automatic creation of entries in the Peer MEP DB for all MEPIDs that have entries in
MEP table and this Peer MEP ID.
set cfm-peer-mep-create <md-idx-list> <ma-idx-list> <peer-mepid-
list>
Use the following command to display Peer MEP information:
show cfm-peer-mep-create [{<md-idx-list> | all} [{<ma-idx-list> |
all} [{<peer-mepid-list> | all}}]]
Use the following command to delete a Peer MEP entry. This command causes
automatic deletion of entries in the Peer MEP DB for all MEPIDs that have entries in
MEP Table and this Peer MEP ID.
clear cfm-peer-mep-create {<md-idx-list> | all} {<ma-idx-list> |
all} {<peer-mepid-list> | all}
Table
11-15
on page 205
lists and describes the Peer MEP attributes.
Figure
7-12 CFM Peer MEP Setup
