Installation and User Manual
EtherHaul
1200™
Page 164
EH-INST-02, Issue 4.0
11
Using the EtherHaul CLI
This chapter describes how to use the EtherHaul Command Line Interface (CLI) client to
configure and maintain EtherHaul devices on your network, and includes the following
topics:
Invoking the CLI
CLI Command Syntax
Viewing the CLI Command History
Invoking CLI Help and Autocompletion
CLI Error Messages
Viewing the EtherHaul Statistics History
CLI Managed Object Reference
Management Object Attributes
Radio Object Attributes
Encryption Object Attributes
Connectivity Fault Management (CFM) Object Attributes
Network Object Attributes
11.1
Invoking the CLI
1.
Run a standard SSH client. You can use a common, open source SSH client
programs such as PuTTY.
2.
Enter the ODU’s IP address
and open the connection. The default IP address is
192.168.0.1
.
3.
Login as user
admin
.
4.
Enter the password
admin
.
When a successful connection is established, the ODU responds as follows:
Siklu-OS
>
Default>
EtherHaul CLI commands should only be entered at the above prompt.
