Contact Details for Oricom Support and
Warranty claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756 Australia
Email: [email protected] Phone:
1300 889 785 or (02) 4574 8888
(Monday to Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Fax: (02) 4574 8898
Contact details for Oricom Support and
Warranty Claims in New Zealand
Email: [email protected]
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
ORICOM UHF CB
ANU
1200
ANTENNA
USER GUIDE 20160309
USER GUIDE - ORICOM
ANU
1200
ANTENNA
1)
2)
Install the
0.43m 3dBi
b
ase and pole
(Stubbie Antenna)
on
to
the
bracket (not supplied).
Tighten in
a
clockwise direction,
using a hexagon
wrench or
spanner.
IMPORTANT: Do not exceed 50N
MAX:50N
4
)
3
)
Remove the cap from the 3dBi Stubbie antenna by turing in an anti-
clockwise direction. *IMPORTANT: Place the cap in a safe place - always
operate the 3dBi Stubbie antena with the cap fitted.
ANU
1200
Pack Includes:
1
2
4
3
Install the Fiberglass extension pole onto the base by turning in a clockwise
direction and secure in place with the grub screw (using the hex key
provided). Hand tighten only MAX. 15N
I
mage
s are
for illustration purposes only
.
Installation
•
UHF CB Antenna (3dBi) with 0.43m* heavy duty
fiberglass pole and custom spring base
•
1m Fiberglass extension pole to convert antenna
to a 1.4m 6.5dBi high gain antenna
•
Includes grub screw and hex key to secure the
fiberglass pole.
Remove the shroud protecting the cable at the base of the antenna
Remove this plastic shroud
To convert to a 1.4m 6dBi gain antenna
MAX:15N
*
