29
OPERATION
EN
G
LI
SH
avoid this delay, run the Descaling function after
every 2-3 uses of the steam mode.
• If the descaling reminder appears, press OK to
run the Descaling function.
• Proofing doesn't operate when the oven is above
125
℉
(52
℃
).
• If using Proof after cooking, wait for the oven to
cool first.
• The Proof mode can only be set as a single stage,
not as part of multi-stage cooking.
Editing My Recipes
• The Edit function cannot add or remove cooking
stages to a recipe. Only the oven temperature,
probe temperature and cook time can be
changed.
1
Turn the Oven Mode knob to select the
My
Recipe
mode.
2
Select the recipe to edit and then touch the
pencil icon at the bottom left of the screen.
3
Edit the settings for the first cooking stage
and touch
Done
to proceed to the next
cooking stage, if any.
4
Edit the next cooking stage, touch
Done
, and
proceed through all cooking stages in the
same way.
5
Once the last cooking stage has been edited,
enter a new name for the recipe or keep the
previous name. Then touch
Save
.
Deleting My Recipes
1
Turn the Oven Mode knob to select
My
Recipe
mode.
2
Select the recipe and touch the trash can icon
at the bottom left of the screen.
3
Touch
Yes
.
Steam Function
Steam cooking uses the moist heat of steam to
cook food. This is an ideal cooking method for
delicate food items such as seafood, which can
lose nutrients when boiled.
The oven provides 2 methods of steam cooking:
Steam Bake
,
Sous Vide
and
Steam Combi
.
CAUTION
• Take care when opening the oven door during or
after steam cooking. Hot steam can cause
scalding.
• After any steam cooking cycle, the drying
function will run automatically. It is normal to
hear the steam pump running during the drying
function.
Using the Steam Feeder Tank
The steam feeder tank is located over the oven
cavity.
1
Gently push the front of the steam feeder
tank to slide it out.
2
Remove the tank and place it on a flat surface.
3
Remove the tank cover or flip open the fill lid
at the front of the tank cover.
4
Fill the tank to the max line located at the
front of the tank. Use softened, filtered water,
if possible. Hard water may clog the steam
generator more quickly with scale buildup.
5
Assemble the cover or snap closed the fill lid.
us_main.book.book Page 29 Monday, April 18, 2022 8:57 AM
