Siemens VDO DTCO 1381 Technical Description Download Page 94

Page: 94 / 302

Service only

4.3 Tachograph cards

Data handling

4 - 20

© Siemens VDO Automotive AG

Edition 07/2007

TD00.1381.00 13

2 102

Variable data

Data on vehicles used

The data about the vehicles used is saved by calendar day and time
period of usage:

•

Vehicle registration number, registering authority of member
state

•

Date, time, and odometer the first time the vehicle is used or the
first time the card is inserted, respectively

•

Date, time, and odometer the last time the vehicle is used or the
withdrawal of the card, respectively

Activities (driver activities)

The following data will be saved for every workday (calendar day on
which the card is used or for which a manual entry is executed):

•

Date

•

Daily usage meter (increased by one each workday)

•

Distance driven per workday

•

Driving status at time 00:00

Each time the activity changes, each time the driving status
changes, or when the card is inserted or withdrawn, the following
data is saved:

•

Driving status (single or crew)

•

Insertion location of the card (slot 1 or 2)

•

Card status (inserted or not inserted)

•

Activity (time group)

•

Time of the change

At least 4 entries will be saved.

Summary of Contents for VDO DTCO 1381













































































































































































































































































































Search results

Summary of Contents for VDO DTCO 1381

Reviews:

Brands by name

Popular brands

Siemens VDO DTCO 1381, Technical Description

Search results

Summary of Contents for VDO DTCO 1381

Reviews:

Brands by name

Popular brands