manualshive.com logo in svg

Siemens VDO DTCO 1381, Technical Description

Share
Download
Siemens VDO DTCO 1381 Technical Description Download Page 213

Service only

Regularly inspection

11.6 Performing the regularly inspection

Edition 07/2007

Technical Description DTCO 1381

11 - 13

TD00.1381.00 13

2 102

11.6.1 Inserting workshop card

Fig. 11 - 2: Inserting workshop card

1.

Switch ignition on (required only for ADR variant).

2.

Eject any tachograph cards that may be already inserted.

3.

Insert workshop card into card slot 1 with the chip facing up 
(after insertion, the card will be automatically locked mechani-
cally).
• The subsequent procedure is menu-guided.

The following description of "Inserting workshop card" is based on a 
DTCO 1381 that is already activated.

For detailed information on activating the DTCO 1381, see chapter 
9.3 "Performing the activation", page 9-8.

Summary of Contents for VDO DTCO 1381















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands