manualshive.com logo in svg

Siemens VDO DTCO 1381, Technical Description

Share
Download
Siemens VDO DTCO 1381 Technical Description Download Page 221

Service only

Regularly inspection

11.6 Performing the regularly inspection

Edition 07/2007

Technical Description DTCO 1381

11 - 21

TD00.1381.00 13

2 102

11.6.7 Creating and sealing installation plate

After the first calibration, the installation plate must be attached on, 
in, or directly next to the recording equipment where it will be easily 
visible.

1.

The following information must be transferred to the instal-
lation plate:
• Calibration date
• Effective wheel circumference (l-value, max. of four digits)
• Characteristic coefficient (w-value, max. of five digits)
• Recording equipment constant (k-value, five digits)
• Vehicle identification number (max. of 17 digits)
• Device number (max. 10 digits)
• Tire size (max. 15 digits)
• Name and address or company logo*.

2.

Attach the installation plate on, in, or directly next to the 
recording equipment where it will be easily visible.

3.

Secure the installation plate with sealing foil.

The installation plate must be protected with a sealing foil, unless it 
is installed in a way that it cannot be withdrawn without destroying 
the information it provides.

The installation plate must be replaced after every intervention into 
the system.

* The name and address or company logo of the workshop or the 
manufacturer may be printed on the sealing foil.

Summary of Contents for VDO DTCO 1381















































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands