manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 97 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 97

Safety

Software Related Safety Information

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.4-3

0.0

A.4

A.4

A.4

CAUTION

A.4

The operating system supports not all characters for the 
received document.

A.4

The display of the name e.g. the patient name may be incom-
plete and/or misleading.

A.4

✧

syngo will not corrupt the used characters (e.g. minority 
characters) even if it can not display them.

✧

Use other attributes for identification if possible.

A.4

CAUTION

A.4

When working with several monitors, the patient name dis-
played in the folder of a task card belongs only to this task card. 
Any other visible task card may contain data from another 
patient.

A.4

Wrong diagnosis is possible.

A.4

✧

Use patient demographics displayed in the image text for 
clear identification.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments