manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 352 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 352

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Positioning the Patient

Operation

D.3-12

Using the laser light marker 

D.3

D.3

D.3

D.3

✧

Switch on the light marker.

B

D.3

After approx. 1 minute, the laser light marker is switched off 
automatically. If you want to switch off the light marker imme-
diately, press the light marker key again.

D.3

D.3

CAUTION

D.3

Looking into laser beam with optical instruments!

D.3

Loss of sight possible.

D.3

✧

Do not look directly into the laser beam.

D.3

CAUTION

D.3

Lightmarker not positioned correctly!

D.3

X-ray not or only partially usable.

D.3

✧

Perform the lightmarker test regularly as part of the 
monthly constancy test.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments