manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 315 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 315

Operation

Switching the System On and Off

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

D.1-11

0.0

After a successful checkup, you read “Automatic checkup com-
pleted”.

D.1

The 

Checkup

 dialog box is closed automatically. The user inter-

face with the task cards is displayed.

D.1

f B

D.1

An error message is displayed.

D.1

An error occurred during checkup.

D.1

D.1

✧

Click on 

Retry

 in the dialog box displayed.

Checkup is started again.

D.1

D.1

f B

D.1

The message “Scan system should not be used” is displayed.

D.1

The checkup failed several times. The system is not ready for 
examination.

D.1

✧

Call the system administrator and/or Siemens Customer 
Service.

D.1

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments