manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 114 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 114

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Software Related Safety Information

Safety

A.4-20

Structured reports

A.4

A.4

A.4

A.4

A.4

CAUTION

A.4

The image quality of images which are viewed within the Struc-
tured Report viewer might not be sufficient for reading pur-
poses.

A.4

Wrong diagnosis possible.

A.4

✧

Do not base your diagnosis on images which were only dis-
played in the Structured Report viewer application.

A.4

CAUTION

A.4

When opening a SR document for further processing, an old ver-
sion of a structured report document is accidentally opened.

A.4

Existing processing results within the latest version of the docu-
ment might get lost because the currently opened document can 
now be saved as latest version.

A.4

✧

When opening and editing a structured report document, 
always assure that you use the latest version. The version 
information is recognizable within the syngo browser.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments