manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 88 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 88

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Mechanical Safety

Safety

A.3-6

Safety equipment  

A.3

The system contains several items of safety equipment to pro-
tect the patient, the operating personnel, accompanying peo-
ple and the system itself.

A.3

In addition to the measures already mentioned, the system has 
the following safety equipment.

A.3

Temperature monitoring of the 
X-Ray tube assembly 

A.3

The temperature of the X-Ray tube assembly is permanently 
monitored and calculated in advance (this function is running in 
the background). If the temperature rises above the limit value, 
a warning is given.

A.3

If necessary, scanning is interrupted until the required cooling 
period has elapsed.

A.3

i

.3

A

This means that you might have to wait a certain time before 
you can continue with the examination as planned.

A.3

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments