manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 49 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 49

Safety

Information about Personal Safety

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.2-5

0.0

Laser beam

A.2

Light marker (laser radiation)

A.2

The patient must be instructed not to look into the laser light 
marker. If necessary, the user must ensure that the patient’s 
eyes are protected (for example, if the patient is not responsive 
or if the eyelid closing reflex is impaired).

A.2

The patient must not wear glasses or contact lenses.

A.2

B

.2

A

Laser Radiation: Do not view directly with optical instruments! 
Class 1M Laser Product

A.2

A.2

A.2

CAUTION

A.2

Looking into laser beam with optical instruments!

A.2

Loss of sight possible.

A.2

✧

Do not look directly into the laser beam.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments