manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 318 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 318

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

Switching the System On and Off

Operation

D.1-14

Maintenance shutdown

D.1

During a maintenance shutdown, the system cleans up unused 
pixel data and defragments the image directories for faster 
access. This operation may take several hours.

D.1

During the maintenance shutdown access to the user interface 
or operating system is not possible. 

D.1

✧

Call up 

System > Run

 in the main menu.

✧

Select 

System Clean Up and Shutdown

.

The 

System Clean Up and Shutdown

 dialog box is displayed.

D.1

✧

Click on 

Start

.

i

D.1

If you do not want to exit syngo, click on 

Cancel

. You return to 

the user interface.

D.1

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments