manualshive.com logo in svg

Siemens SOMATOM Emotion syngo CT 2007E, Operator'S Manual, Page: 113 / 574

Share
Download
Siemens SOMATOM Emotion syngo CT 2007E Operator'S Manual Download Page 113

Safety

Software Related Safety Information

 

0.0

syngo CT 2007E

Emotion Operator Manual

02/2008

0.0

A.4-19

0.0

A.4

A.4

A.4

CAUTION

A.4

Rearrange series/images to another series may lead to wrong 
image information if the selected images/series are not compat-
ible.

A.4

Wrong diagnosis caused by wrong image information.

A.4

✧

Correct the attributes which do not correspond first and 
then rearrange the series/ images.

A.4

CAUTION

A.4

Correcting/rearranging patient data containing RT (Radio Ther-
apy) objects.

A.4

References between images and RT objects cannot be main-
tained when correcting/rearranging.

A.4

✧

Use original applications for managing the references of RT 
objects.

Summary of Contents for SOMATOM Emotion syngo CT 2007E































































































































































































































































































































































































































































































































































































Reviews:

No comments